Lincat Opus 800 OE8210, Инструкции по установке, эксплуатации и обслуживанию

Страница: 4 / 12

IS 607 ECN 4345 Page 4 of 12
INSTALLATION AND COMMISSIONING
This product is heavy; prior to installation a handling assessment should be made.
This appliance must be earthed. An equipotential bonding terminal is provided to
allow cross bonding with other equipment.
Means of isolation with at least 3mm contact separation in all poles must be
incorporated into the fixed wiring of this appliance.
The fixed wiring insulation must be protected by insulated sleeving having a
temperature rating of at least 60 Deg C.
Supply cords shall be oil resistant, sheathed flexible cable not lighter than ordinary
polychloroprene or equivalent elastomer sheathed cord (code 60245 IEC 57)
Install this appliance beneath an extraction canopy.
If using a stand fitted with castors, use caution at all times when manipulating or
moving, and lock castors when appliance is in position.
Install this appliance on a level surface ensuring all vents are unobstructed. Any
partitions, walls or furniture must be of non-combustible material (see Fig 1).
Minimum distances A 100mm B 1000mm.
Electrical connection
The electrical supply cable enters the unit through a cable gland in the rear panel.
Connection of the electrical supply cable is to a terminal block behind the facia
panel. The terminal block has a metal cover retained by two screws.