IS 602 ECN 3913
Page 6 of 13
OPERATING INSTRUCTIONS
Only qualified or trained personnel should use this appliance.
1 OF 1
A
B
C
D
E
Fig 2
Before using the appliance for the first time, turn the hotplates to full setting for 4
minutes without pans to allow them to cure and harden to maximum durability.
Hotplates
Switch on the electricity supply
– the green neon (A) illuminates.
The hotplates are controlled by 6 position rotary switched controls (E), each marked
by an individual hob marker (D).
For maximum efficiency, always use good quality pans with lids.
Oven operation
Switch on at the main supply and check the green neon (A) is illuminated.
Set the oven control (B) to the desired temperature. The amber neon (C) will
illuminate.
The amber neon extinguishes when the set temperature is reached and then cycles
as the element maintains the oven temperature.
Be aware of the escape of hot air when opening the oven doors.
Shutdown
After use, turn all control knobs to the ‘Off’ position and switch off the mains
electricity supply.
