Lincar Annarita 698 TP-SAC, Инструкция по использованию и обслуживанию, Страница: 72 / 116

IT IT IT IT----GB GB GB GB----FR FR FR FR mod. 698 TPC– 698 TP-SAC
72/116
Press
Water
Noticed wrong
boiler pressure.
Wrong pressure of thermal
plant.
Too high pressure
Electrical connections
interrupted.
Pressure switch control
breakdown.
Verify thermal plant pressure.
(min. 0,5bar max. 2bar).
Reduce the pressure of the plant by
draining water.
Verify the electrical connections of
pressure switch.
Verify/replace pressure switch
control.
Feeler
Water
Boiler
temperature
feeler signaling
error.
Verify/replace temperature feeler.
Feeler
exhaust
Exhaust feeler
signaling error
Verify/replace exhaust feeler.
Hot
exhaust
Fume
temperature too
high
Wrong appliance
carburation.
Change fuel.
Fume feeler
Verification of appliance by a
technical service center.
Proceed with “Pellet Correct”.
Verification of appliance by a
technical service center.
Utilize better quality of pellet .
Proceed with “Pellet Correct”.
Verify fume feeler position.
Verify/replace fume feeler.
Hot
Water
Boiler water
temperature too
high
Wrong appliance
carburation
Breakdown/block
circulation plant pump.
Air inside the boiler.
Fume feeler
.
Verification of appliance by a
technical service center.
Proceed with “Pellet Correct”.
Verify circulation pump working
Eliminate air from the thermal plant
Verify boiler feeler position.
Verify/replace boiler feeler.
Black-Out
A black-out has
happened during
the regular
working.
Empty and clean the burner basket
and then proceed with the lighting
phase.
EXAMPLES OF APPLIANCE/PLANT CONNECTION
The following connection diagrams are only indications of some connection
possibilities and should not be considered as satisfaction in matter of installations.