Lincar 0000, Инструкция по использованию и обслуживанию

Страница: 54 / 112

IT-GB-FR
mod. 940-940/SA
54/112
Fuel

The fuel to be utilized is
:
GOOD QUALITY WOOD PELLETS’
Calorific power kWh/kg 4,8÷5,2
Density kg/m
3
650
Water contents % Max 8% of weight
Ash percentage % Max 1% of weight
Diameter mm 6
Lenght mm 20 ÷ 30
Contents % 100% untreated wood

It is not allowed to use solid fuels as straw, mais, hazelnut, pinecone or others, different
from the ones indicated in this handbook. We recommend to ask to Your Dealer always
for certified pellet (as per above table).
INFORMATION ABOUT PELLETS

Pellets are realized with wood rejections that come from sawmills or from planing shops
and with wood fragment of forest industry. This raw material is shattered, dried up,
crushed, without any bound material till up to become the pellet fuel.
PELLETS PRESERVATION

Pellet has to be kept in a dry and clean rooms.
Starting

The appliance should set at work only after having completed the following operations:
complete assembling, connection to exhaust fumes duct and to the heating plant. A new
appliance needs to complete the drying process of the paint. During the first heatings you
can notice the following situations:
- During the first ignitions the appliance may exhale bad smell. We suggest a good
aeration of the room till bad smells have been eliminated.
- The complete drying process will be obtained after some heating operations
WOOD PELLET LOADING

Be careful during wood pellet loading operation ! The pellet bag should not touch the
warm appliance.

Be careful that no external corps, such as pieces of bag, wood pieces or other parts, that
can obstruct the screw feeder and damage it, enter into the pellet tank .

The load of pellet is done from the top, after having removed the cover. During appliance
functioning, it is advisable to employ the specific glove, because the appliance surface
could reach high temperature. Check always the level of fuel in the container and check-
it often, to avoid the light off of the appliance. The cover of the container must be always
closed, except during pellet loading. Pellet container capacity : information on Technical
details part.