Page 14 of 24
Assembling DF2 system
1. Gather all parts for desk including tabletop.
2. Turn tabletop upside down.
3. Fix beam length.
3.1. Extend beam to required length (width 1150 to 1750 mm), adjustable in 50 mm steps).
The beam must
not
be pulled completely apart in order not to pull the drive shaft apart.
Minimum adjustment in the connection end is 100 mm (to keep power and RJ45 sockets accessible),
otherwise adjustable in 50 mm steps.
Installation
Check the packaging and the delivered items for visible damage and ensure that the drive shaft
is mounted correctly and not pulled apart.