Connection diagram
20
2019 © LINAK A/S
IO Link
25XXXXXXXXXXAB1X=XXXXXXXXXXXXX
Please be aware that if the power supply is not properly connected, you might damage
the actuator!
An IODD file describes the IO-Link parameters for
easy PLC configuration
.
The newest version is available online at the official IO-Link IODDfinder.
BROWN
BLUE
RED
GREEN
WHITE
VIOLET
DATA
DATA GND
M
H-Bridge
L+
C/Q
BLACK
L-
Connects to:
Actuator
Flying leads:
M12 Port
Class B
2L+
Brown
2
2M
Blue
5
L+
Red
1
C/Q
Green
4
L-
Black
3
The LA25 with IO-Link and M12 connector is a
plug-and-play solution.
If flying leads is the preferred option, please be aware that
the LINAK cable colours differ from the IO-Link standard.
The cable colours from the actuator and the M12 port
numbers are specified in the table below.
In a setup where the violet and white wires are not used,
we strongly recommend insulating these to avoid short
circuits and eventually damaging the actuator.
M12 Plug on device
3
2
1
4
5
2L
+
2M
L-
C/Q
L+
M12 connector
2L+
(motor +)
2M
(motor -)
We offer a service interface called
BusLink
with features like e.g. diagnostics, manual run and configuration
The newest version is available online at
LINAK.COM
/TECHLINE
Please note: The BusLink configuration cable must be purchased seperately
Item number for BusLink cable kit: 0147996 (a USB2Lin)
2
1
3
4
5
Standard connector front view
F O R M O U N T I N G I N S T R U C T I O N S A N D G U I D A N C E I N U S A G E , P L E A S E S E E T H E R E L E V A N T U S E R M A N U A L S
Copyright © LINAK
2021.11
. MA-M9-02-844
. LINAK
A/S reserves the right to mak
e technical alter
ations
