LIMIT M3620, Руководство пользователя

Страница: 8 / 20

9
GB
PS. : Pushing the button for a long time means going out from the position of the time adjusted
Cooking ( automatic) . ( Please see the revelant pharagraph below) .
TIME ADJUSTMENT:
You can step in the time adjustment menu by pushing button 3 times.
In order to change the duration of the fermentation:
and the clock is setting up by the button, pushing these buttons for a long time
Yoghourt fermentation function ,if there is no cooking function in use, is getting started by
As a default factory adjustment the fermentation has been set as 5 hours. The remaining time
For the fermentation is shown on the time screen. Unless button is cancelled ( is on the
Press the button it will start flashing
.
M
Adjust the duration by pressing the button on the screen (the duration cannot be set
under 5 hours or over 10 hours)
When the fermentation process is finished, the alarm will sound and the icon will start
flashing on the screen. By pressing the button you can terminate the process or change
EXCEPTIONS:
If the oven temperature is over 60 C the fermentation process will not start. You will hear a
warning tone and the phrase “hot” will be visible on the screen.
When power is cut off during fermentation, 3 beeps will sound and the remaing time (before the
electricity was cut off) will appear flashing.
As mentioned above, the button can be used to terminate the fermentation or to change the
remaining duration.
KEEPING WARM FUNCTION
The keeping warm function will be activated when pressing the button. You will see the
C
C
SETTING THE COOKING HEAT:
Besides the yogurt and keeping warm function you can use it for cooking as well. When pressing
The button, the icon will start flashing next to the temperature.
By pressing and you can set the temperature between 50 C and 230 C (if you don't have
a set temperature, the preset factory temperature of 190 C will appear)
In order to switch off the temperature indication on the screen or to disable it, press and hold
the button. The temperature will disapear and the oven heaters will turn off.
C
C
PERSONOLIZING THE FACTORY HEAT SETTINGS:
C M
YOGHURT FERMENTATION FUNCTION:
M
starts blinking
makes the clock set up quickly. The clock adjustment mode will end after around 5 seconds by
Itself.
Button and , symbol alerts and by the same button it ends.
screen) , user can adjust the remaining time.
the duration.
icon on the screen. With this function, the oven temparature will be 80 C and will be kept
constant, however the temperature will not be indicated on the screen. Changing the
temperature is not possible (the button is non-functional) By pressing the button again,
this function will be canceled
.
In order to change the preset factory temperature of 190 C, press and at the same time
until you hear a short beep.