Limerick PJ's Comfort, Руководство пользователя

Страница: 39 / 45

Page 33 Troubleshooting
Troubleshooting
Troubleshooting your PJ’s Comfort multi-user breast pump is
designed for ease of use, effectiveness, and safety. Our high
standards are the result of our certified lactation consultants’
experience with tens of thousands of mothers expressing milk for
their infants. If you have any questions about the use or assembly
of your
PJ’s Comfort breast pump, see “Accessory Kit Setup and
Assembly” on page 19 and/or go to limerickinc.com to make sure
you have assembled the accessory kit properly.
Problem A:
1) Pump not turning on and 2) no lights are on
are both indications of a possible power adapter failure
Instruction:
1. Ensure adapter power jack is inserted fully and doesn’t feel loose.
2. Unplug the power adapter completely from the pump and wall
outlet; inspect the cords for any signs of damage.
3. Try plugging power adapter into another wall outlet.
4. Call Limerick Customer Service.
Problem B:
Not cycling; there is suction but no releases
(indication of air leak in tubing kit or possible pump failure)
Instruction:
1. Remove filter with all its tubing from pump entirely.
2. Turn on and set both vacuum and cycle speed to 30 (thirty).
3. Pump should be making a steady sound of pumping, but not a
cycling on and off sound.
4. Place finger over the small vacuum hole where the filter goes.
(Make sure you get a good seal over small opening in white