Lilitab TableTop
Assembly Instructions v2.0
4
BOLT THROUGH ASSEMBLY: NO BASE
1.
Bolt Through Installation.
Mark hole
placement using the mounting pattern
on page 6.
Drill 6mm clearance openings through
your surface.
Attach to your surface from underneath by
using four (4) M4 screws of appropriate
length (not included).
Refer to your Lilitab Head Unit owner’s
manual for tablet installation instructions.
CABLE MANAGEMENT
Equipment Compartment Door
The charging cable can run through the
opening at the bottom of the equipment
compartment door. Once installed, this
door can be opened by unscrewing the two
(2) screws with the provided
L Key.
AC Adapter Option
The housing inside the TableTop can
accomodate your AC Adapter if you prefer
to conceal the cables.
Cable Exit From Base.
Use this opening
if you plan to pass the cable through
your surface.
