Bachmann Europe Plc
H0 1:87
9
Installation of a DCC Decoder
Directly next to the multi-switch shown in
Fig. 7 on the underside of the railcar is also
the 21-pin interface (
D) for the digital deco-
der. After unclipping the cover, the jumper
can be removed and the decoder attached.
When doing this please make sure you follow
the installation instructions of the decoder
manufacturer exactly.
For questions regarding function and instal-
lation, please contact the decoder supplier or
manufacturer.
Fig. 7
Installation of a loudspeaker
The railcar already comes completely pre-
pared for locomotive sound operation. After
fitting the sound decoder as shown in
Fig. 7,
the socket (
SP1) for the loudspeaker is loca-
ted on the top of the circuit board (
M1) as per
Fig. 8.
Use a loudspeaker 20 mm in diameter. Two
pins (
SP2) are already fitted to the circuit
board to connect the loudspeaker. Please
also refer to the instructions of the decoder or
loudspeaker manufacturer.
Fig. 8
D
S
SP1
SP2
M1
