The camera is supplied with a plug to fit the AUTO IRIS connector. To connect
an auto iris lens, first replace the plug on the lens cable with the supplied plug.
Solder the lens cable to the pins of the supplied plug (For cable pin
assignment, refer to the instruction manual for the lens.).
CHANGING THE PLUG ON AN AUTO IRIS LENS CABLE
Cover
Lens cable
Rib (If the cable is thick, cut this off.)
Plug (Unit accessory)
Pin 4
Pin 2
Pin 1
Pin 3
Video signal control
DC control
Video signal control
DC control
Video signal control
DC control
Video signal control
DC control
Ground
Drive -
Vcc
C
Not used
Control -
Video signal
Drive +
8
