17
To update firmware of PIH-036/038IP, please click on Firmware Update hyper link. Locate
"flash036.bin" in your computer by click Browse button. Click Submit to finish firmware
upgrade. To ensure the quality of transmission, please make sure that there is no user
accessing PIH-036/038IP during firmware upgrade.
Firewall Setup can enable the Denial of Service to block ICMP Ping attacks from Internet
(DoS).
Chapter 7-3.
Network
PIH-036/038IP provides many Internet protocols such as IP, DHCP, PPPoE, and DDNS. A user
can configure these Internet protocol settings. To setup above, please read the following sections.
Chapter 7-3-1.
General Settings
Network general settings are the basic settings connecting PIH-036/038IP to the network.
The default IP Address of PIH-036/038IP is 192.168.0.100. A user can use this IP address to
verify the network connection between a local PC and PIH-036/038IP using Internet Browser.
For Internet access configuration, please contact your local ISP for global IP address. Once
the physical Internet connection gets installed, enter IP address (global), Subnet Mask, and
Gateway IP from the ISP.