19
Chapter 3-3-4 System Setting
Load Default feature allows to load manufacturing default. There are
certain critical settings such as IP addresses and video system which do
not be affected by this operation. To reboot H.264 AVC IP camera, click on
Reboot System hyper link.
To update firmware of H.264 AVC IP camera, please click on Firmware
Update hyper link. Locate “flash2235.bin” in your computer by click the
Browse button. Click Submit button to finish firmware upgrade. To
ensure the quality of transmission, please make sure that there is no user
accessing H.264 AVC IP camera during the firmware upgrade.
Chapter 3-4 Network
H.264 AVC IP camera provides many Internet protocols such as IP, DHCP,
PPPoE, and DDNS. A user can configure these Internet protocol settings.
To setup above, please read the following sections:
Note:
In case of forgetting password, the device is required to send back to our
company for a manufacturing default or read appendix for emergency default.
