8
Chapter 2 Before Access IP Camera
Before accessing the IP camera, make sure that camera’s analog BNC
output, RJ-45 network cable, audio cable, and IP camera’s power cable are
properly installed. For setup IP address, please consult your network
administrator for available IP addresses. The default IP address of IP
camera is 192.168.0.200. User can also user default IP address to verify
IP camera’s network connection.
Chapter 2-1 DIP Switch Settings
Please see appendix for detail.
Chapter 2-2 Configure IP Address Using IPScan Utility
To configure IP address using IPScan utility, copy IPScan application from
installation CD to your local PC or execute IPScan software from
installation CD directly. IPScan utility can also be downloaded from our
company web site. To change IP address, subnet mask, gateway, or
HTTP port, please follow steps below:
Run IPScan utility.
Click on Refresh button. All available devices get listed in Device list box.
Select the device item in Device list box.
Edit or modify addresses in IP, Subnet Mask, Gateway, or HTTP Port
edit box.
Click on Apply button to configure the settings.
Click on Refresh button to verify the settings.
