VIDEO OUTPUT CONNECTOR
EXTERNAL DEVICE CONNECTORS
USER OSD SETTING
Composite video signal output.
Setting switches and Functions.
1.
(UP)
2.
(LEFT)
3.
(RIGHT)
4.
(DOWN)
5. SET : Executes selections and displays a submenu for an item with the
mark.
1. NO(Normal Open) & COM(Common) & NC(Normal Close)
Alarm Connection
Connect to the alarm input of an external device such as a buzzer or lamp
to this connector. When the camera detects motion, the alarm output signal
is supplied to the connected external device.
Contact Ratings
Maximum load current is 500mA.
Don't connect any system or device that
has over 80Vp-p(DC60V) bias voltage on
the contact connector.
9
10
11
6
: Press to move the cursor upwards
or to select items.
: Press to move the cursor to the left
and to select or adjust the parameters
of the selected item. The parameters
changes each time this button is pressed.
: Press to move the cursor to the right and to select or adjust the
parameters of the selected item. The parameters changes each
time this button is pressed.
: Press to move the cursor downwards or to select items.
If you use the NO&COM&NC connectors, you should set the MOTION DET option
to ON on the CAMERA SETTING menu, and select a ON on the TRIGGER option.
NOTE
External
Device
NO
COM
NC
RIGHT
LEFT
DOWN
UP
SET
