3
LENS MOUNT CAP
CAMERA MOUNTING BRACKET
USER OSD SETTING
Prevent damages to the optical lens and to keep dust away.
The mounting bracket mounted underneath the main body can be mounted to either the top
or bottom of the camera using the attached screws(M2.6x5.0).
SETTING SWITCHES AND FUNCTIONS
UP (T): Press to move the cursor upward or to select
items, and manual Zoom In.
DOWN
LEFT
(W): Press to move the cursor downwards or
to select items, and manual Zoom Out.
(F): Press to move the cursor to the left and to
select or adjust the parameters of the selected item, and manual Focus Far.
RIGHT(N)
Press to move the cursor to the right and to select or adjust the parameters
of the selected item, and manual Focus Near.
SET: Press to display the SETUP menu, if the selected item has sub-menu, press again
to enter sub-menu.
Power ON/OFF indicator.
Composite video signal output.
DC12V 10% power input.
RS-485/RS-232 communication input.
RS-485: Connecting to keyboard controller.
RS-232: Connecting to PC.
Set the front and last equipments terminal resistor as ON. The parallel connection
equipment in the middle set as OFF to keep the best transmitted status.
POWER LED
VIDEO OUTPUT BNC CONNECTOR
DC12V INPUT TERMINAL
COMMUNICATION TERMINAL
COMMUNICATION INTERFACE SWITCH
RS-485 TERMINAL RESISTOR SWITCH
1
2
3
4
5
6
7
8
9
UP(T)
DOWN(W)
RIGHT(N)
LEFT(F)
SET