Move the cursor to "DLY TIME" and select Delay Time by using [LEFT/RIGHT]
button.
The color and monochrome mode switch delay time prevents the image turning from
color to monochrome or monochrome to color too quickly under unstable light
condition.
Delay Time: 02~10 sec.
Move the cursor to "OUTPUT" and select NO(normally open) or NC(normally close)
by using [LEFT/RIGHT] button.
1. When light level is over 5 lux, camera switches DAY automatically to produce
color image. When light drops below 1 lux, camera switches NIGHT automatic-
ally to produce monochrome image. Under monochrome mode, sensitivity is
increased to 0.01 lux and can be used with IR illuminators.
2. When power off, the MOS-RELAY output is NO (normally open).
NOTE
(2) EXCTRL
Move the cursor to "DAY/NIGHT" and select
EXCTRL by using [LEFT/RIGHT] button.
Press [SET] button to display the D/N EXCTRL
menu.
Move the cursor to "IN POTENTIAL" and select
LOW or HIGH by using [LEFT/RIGHT] button.
This function allows the usage of external device
to control camera switching from DAY to NIGHT mode or NIGHT to DAY mode.
High (+5V~+12V) potential or Low (0V) potential.
(3) DAY
Move the cursor to "DAY/NIGHT" and select DAY by using [LEFT/RIGHT] button.
IR Cut Filter is ON to produce clear color image.
(4) NIGHT
Move the cursor to "DAY/NIGHT" and select NIGHT by using [LEFT/RIGHT] button.
IR Cut Filter is OFF to produce constant monochrome image.
D/N EXCTRL
IN POTENTIAL
BACK
EXIT
LOW
13