Lilin 7000MPG4OOE, Руководство пользователя

Страница: 88 / 92

4. Verify updated contents
After uploading the custom pages, open browser to verify the correctness of contents. If not correct, modify the
pages and return to previous step to upload again.
5. Save the changes to flash
Telnet to the NDC. And run command “Up –w” to write the complete web pages into flash. The detailed
procedures are list as below,
Open DOS window
Enter “telnet <IP Address of the NDC >”
Enter “root” and “pass” as username and password
Enter “Up –w” to start the web content update program.
The command is case sensitive. Don’t enter the wrong case or you’ll get the command not find error message.
After processing about 30 seconds, the NDC will restart automatically and complete the web content updating.
Now you can open the browser to see the new web content.
Note:
The limitation of overall size of content pages is around 700K Bytes. Any file added/updated plus
original downloaded file (~550K Bytes) should not exceed this size; otherwise, some files will be truncated or
corrupted. If the corruption of any page happens, you will have to reload the original binary in order to recover
the corruption.
For example, the NDC IP address is 192.168.0.200, then
C:\temp>telnet 192.168.0.200
C:\temp>
Telnet session Open Telnet session
Login: root
Password: Enter “pass” as default
Welcome to VidSvr on Telnet ...
IVS> Up –w
Upgrade WWW Pages... Frozen here, close and open browser
After 30 seconds to verify the changes.
87