![Lilin 7000MPG4OOE Скачать руководство пользователя страница 48](http://html1.mh-extra.com/html/lilin/7000mpg4ooe/7000mpg4ooe_user-manual_1916344048.webp)
DDNS Server Address : Specify address of the DDNS server.
DDNS Connection Port : Specify the DDNS server listen port, and the default is “80”
Router Incoming Port : Specify your router listen port for the DDNS server to redirect. The router may configure
the different port for incoming (Internet request) and outgoing (Intranet request), e.g. it may configure to redirect
Internet HTTP (port 80) request to Intranet port 8000, then, in this case, we must configure the “Router Incoming
Port” to 80, and inside the NDC Network settings should set HTTP port with 8000.
Update Time : Specify the NDC updated frequency in seconds, and the default is 600 (10 minutes), this is interval
that NDC will automatically send an updated packet to the DDNS server.
DDNS Message : Return messages from remote DDNS server, and some hints may help to diagnostic the reason
if register fails.
DDNS addr. CGI fail:
♦
♦
It means that NDC can’t communicate with Internet world. Make sure your Network Configuration has correct
subnet mask and default gateway, and DNS1 setting is correct and reachable.
Already registered:
Another user had registered this name; please change your register name by changing “Device Name”.
Apply : Click this button to save the changes made.
Example:
To setup a NDC (IP address 192.168.0.200) behind a dialup ADSL router, and wish to access by name
http://demo.ddns.com. And, the procedure is as below:
Configure the ADSL router with PPPoE enable; LAN IP, 192.168.0.254; and subnet mask, 255.255.255.0.
1. Assign the ADSL router’s virtual server with service port 80 to server IP 192.168.0.200
2. In Network Settings > General page, configure the NDC network configuration with IP address 192.168.0.200;
subnet 255.255.255.0; DNS1 with valid DNS address such as 168.95.192.1 or 168.95.1.1; gateway IP address
with 192.168.0.254 (router’s IP); HTTP port with port 80.
3. Configure the Device Name.
4. Configure Dynamic DNS Settings with Enabled; DDNS Server Address with “ddns.com”; DDNS Connection Port
with port 80; Router Incoming Port with 80; and Update Time with 600 (10 minutes). Finally, clicks [Apply] button.
5. If DDNS message success, then enter URL http://demo.ddns.com on browser. Consequentially, it will show the
NDC’s home page.
47
Содержание 7000MPG4OOE
