background image

32

4. Use

The device is in the sleep 

mode and does not operate 

unless activated for your first 

use. To wake up the device 

press the Button for 2 seconds 

or connect the charger to the 

charging port.

•  If you insert the stick upside down, the device can break down during use. Please check the insertion 

direction of the stick before use.

•  Close the cover of the stick insertion part when the device is not in use to prevent any substances from getting inside.

Get your device.

Slide and open the Cover of 

the stick insertion part at the 

top of the device.

Insert a Fiit tobacco stick designed 

for lil SOLID into the stick insertion 

part with the tobacco part facing 

down and press the stick in until 

it touches the bottom of the stick 

insertion part. 

While the device wakes up, 

the Status LED blinks twice in 

red, orange, ice blue and blue, 

sequentially.

Once the device is activated, 

the Status LED blinks in 

ice blue for one second 

and vibration occurs twice, 

simultaneously.

Steps before use

To conserve battery life, the device will return to sleep mode:

① 

if it is not charged for 24 hours when the Status LED light is red.

② 

if it is not used for 7 days when the Status LED light is orange, ice blue, or blue.

Содержание S-MONO-21




















Отзывы: