After installation, check that
the latch locks and runs freely
in the sling bar hook.
Installation of latches
Care and maintenance
For safe and trouble-free operation, a few routine procedures should be performed every day, before the sling bar is in use:
•
Check the screw and locking nut that attaches the sling bar
• Check the function of latches and that the latches are intact; missing or damaged latches must always be replaced
• When using a Quick-release Hook system, check that the Quick-release Hook is correctly fastened to the lift and the sling bar
• Before lifting, check that the lifting accessory hangs vertically and can move freely.
When necessary, clean the lift with a moist cloth. Find more detailed information regarding cleaning and disinfection of your Liko™ product
in the document
Care and Maintenance
Service
A periodic inspection of the sling bar should be carried out at least once a year.
Periodic inspection, repair and maintenance may be performed only in accordance with the Liko™ service manual by personnel
authorized by Hill-Rom and using original Liko™ spare parts.
Expected Life Time
The product has an expected life time of 10 years when correctly handled, serviced and periodically inspected in accordance with Liko’s
instructions.
Product Changes
Liko’s products undergo continuous development, which is why we reserve the right to make product changes without prior notice. Contact
your Liko representative for advice and information about product upgrades.
Design and Quality by Liko in Sweden
Hill-Rom´s Management system are certified in accordance with ISO 9001 and its equivalent for the medical device industry, ISO 13485.
Hill-Rom´s Management system is also certified in accordance with environmental standard ISO 14001.
© Cop
yrigh
t Lik
o R&D AB 2015
Attaching the SlingBar Mini 220 R2R to:
Likorall™ 242 R2R overhead lift, Likorall™ 243 overhead lift, Likorall™ 250 overhead lift, Likorall™ 200 overhead lift
.
The SlingBar Mini 220 R2R
double hook with its Quick-release function, has protection against unintentional detachment, see fig. 1.
overhead lift A
overhead lift B
fig. 1
Before lifting check that the Quick-release Hook is correctly attached to the Q-link,
see illustration above.
Quick-release
function
Q-link
