Liko Sabina, Инструкция по сборке, Страница: 30 / 37

Preventative Maintenance Sabina www.liko.com 65
7.0
Sabina™
Instructions regarding the check points for
Sabina ll
D
17
17
2.
1.
1. Remove splitpin, bolt and bushing. Lubricate center pin and plastic bushing. Replace if worn.
2. Remove splitpins.
4. Pull out link arms.
6. Adjust base width (”D” in technical data).
3. Remove locking nut on the link arms.
5. Clean the link arms and hole in center. Start by
brushing grease into the holes. Apply a thin layer of
grease to the link arms. Re-assemble in reverse order.
7. Adjust the linkarms so that it goes up through the
base at a 90-degree angle. Tighten locking nuts, check
play after assembly.
5A Electric base linkarm lubrication
No. 2-7, every 3
rd
year
No. 1, lubricate every year
Tools required
17 mm
13 mm