Liko Golvo 7000 Series, Руководство по обслуживанию

Страница: 54 / 129

Assembly Instructions/Exchange
www.liko.com
Lift strap 7007
Part. no. 20090019
4.15.1
Tools required:
3 mm
4 mm
13 mm
8 mm
1. Pull the strap all the way out .
4. Use the pin to lock the axle
where the strap was mounted.
3. Remove the pin. Do not let go
of the springloaded wheel, or the
tension will release.
2. Hold the springloaded wheel and
release the strap by removing the
pin.
5. Push the emergency lowering
handle down and pull away the
strap.
6. Pull out the rest of the strap and
remove the plastic housing.
7. Mount the new strap through
the plastic housing with the red
mark towards the plastic housing
and then as shown above.
8. Mount the strap through the slot in
the axle and back the same way. Note!
The axle have two different sides. Place
the pin as shown to lock the strap. Do
not let go of the springloaded wheel, or
the tension will release.
10. Roll up the strap until the red
mark reaches the plastic housing.
9. Push the plastic housing
on to the strap joint. .
11.
12.
13. 14.