Liko Golvo 7000 Series, Руководство по обслуживанию

Страница: 31 / 129

Assembly Instructions/Exchange
www.liko.com
Mast
4.2.1
Start by unscrewing the transport safety plate (metal plate)
at the lower edge of the mast. Save the safety plate and
screws for later use if needed.
1) Place the mast on the center beam of the base,
between the two black plastic caps.
2) Push the mast forward as shown in the illustration
above, until it snaps onto the center beam.
IMPORTANT!
Secure the mast with two M6 screws (enclosed) in
the upper holes on the mast.
Note! Do not place any screws in the lower holes!
1. 2.
2. Screw the safety screws in the
lower holes on the mast. This rele-
ases the mast from the base and it
can now be taken down.
Remove the mast:
1. Remove the both safety screws
from the upper holes on the mast.
When the mast is free from
the base it must be supported
so it does not fall.
1
2