Service Manual Traverse Switch
• 3EN120401 Rev. 7
6
www.liko.com
l
www.hill-rom.com
3.0 Spare Parts Assembly Information
Assembly Instructions to Liko™ spare parts are attached with the products.
The assembly instructions are also available in Agile and on the Partner Web.
Document number to spare parts assembly instructions can be found in the spare parts list.
Liko technical documentation can be found on the Partnerweb:
https://partner.liko.com “My information” - “Documents”
If you don’t have access, send a mail for registration to: [email protected]
NOTE
- Always make sure the spare part is mounted according to the assembly instruction.
- Check all functions related to the changed spare part.
-
Repairs and maintenance may only be performed by personnel authorized by Hill-Rom
and using original Liko™ spare parts.
Actuator LA12
Ställdon LA12
Assembly Instruction
Monteringsanvisning
Prod. No. 31790001
3SE690217-02
2012-10-01
Tools required
17 mm
6 mm
Contains:
Qty:
Actuator LA12
1
Locking ring D8
2
Screw K6S M10x35
1
Nut M10
1
Fits:
3124604 Traverse Switch
NOTE
- Make sure the spare part is mounted according to the assembly instruction.
- Check all functions related to the changed spare part.
-
Repairs and maintenance may only be performed by personnel authorized by Hill-Rom/Liko and using original Liko spare parts.
www.liko.com
© Copyright Liko AB
4.497
1. Move the traverse switch to closed position, with
hand control or fixed switch.
2. Unplug the current from the actuator.
3. With the long nose plier remove the lower locking ring
from the locking pin.
4. Remove the locking pin.
5. Unscrew the screw and nut.
6. Replace the old actuator.
7. Reassemble in reverse order.
Connected to controlbox or multistation.
2
3
4
5
Document Number
INF
ORMA
TION
