LD14x
rES
(only with Unit = dEC, FrEE, dG1, dG2, IdEC )
It sets the resolution to be displayed.
= dEC, FrEE, dG1, dG2 = 0.001, 0.005,
0.01
,
0.05, 0.1, 0.5, 1
0.001
, 0.005, 0.01,
0.05, 0.1
*
= save,
P
= next parameter,
P
for 3 s. = exit
dIr
Counting direction [uP, dn]
uP
= up (standard direction)
dn = down (inverted direction)
*
= save,
P
= next parameter,
P
for 3 s. = exit
6.3.3 Additional function of MENU 1
F_mmI
mm/inch function [yES, no]
It enables the mm/inch function (pressing
key).
yES = enabled
no
= disabled
*
= save,
P
= next parameter,
P
for 3 s. = exit
F_rEL
Incremental measurement function [yES, no]
It enables the incremental measurement function
(by pressing
P
and
*
keys).
yES = enabled
no
= disabled
*
= save,
P
= next parameter,
P
for 3 s. = exit
F_rSt
Datum function [yES, no]
It enables the datum function (pressing
*
key).
yES = enabled
no
= disabled
*
= save,
P
= next parameter,
P
for 3 s. = exit
F_rEF
Datum modification function [yES, no]
It enables the reference modification function
(pressing
P
and
keys).
yES = enabled
no
= disabled
*
= save,
P
= next parameter,
P
for 3 s. = exit
F_oFS
Offset modification function [yES, no]
It enables the offset modification function (pressing
P
and
keys).
yES = enabled
no
= disabled
*
= save,
P
= next parameter,
P
for 3 s. = exit
rEF
Datum value [-999999, 999999]
Absolute reference value for the measuring system.
This value is displayed by pressing
*
key for 3 sec.
(displayed value includes previously set offset
values).
*
= save,
P
= next parameter,
P
for 3 s. = exit
OFS1
Offset1 value [-999999, 999999]
First offset value (e.g. tool correction). This value is
added to the current value (see “6.2.4 Changing the
Offset value“).
*
= save,
P
= next parameter,
P
for 3 s. = exit
OFS2
Offset2 value [-999999, 999999]
Second Offset value. This value is added to the
current value and
*
= save,
P
= next parameter,
P
for 3 s. = exit
OFS3
Offset3 value [-999999, 999999]
Third Offset value. This value is added to the current
value,
and
*
= save,
P
= next parameter,
P
for 3 s. = exit
When the setup is carried out the display shows
"
rESEt
".
Press
*
key twice to reset the display and quit the
setup.
"donE"
will be displayed.
Press
P
key to quit the setup without resetting the
display.
"no rSt"
will be displayed.
6.3.4 Parameter list MENU 2
Ad xx
Device address [01, 31]
Setting of device address, only if the device is fitted
with serial interface (option I1).
____________________________________________________________________________________________
MAN LD14x I_E_D 4.4.odt
12
www.lika.it
www.lika.biz
