Lika IF50, Руководство пользователя

Страница: 32 / 40

IF50
Enter the field in the STATUS column, next to the desired register code (where
you can read ON or OFF). Now you can switch between ON and OFF by pressing
any key, thus activating and deactivating the field.
Set to ON all the register codes you want to display on the monitor. Switch to
OFF all unused register codes.
If you want, you can change the label (text) which appears next to the register
code by clicking on the corresponding text field. The text will now appear in the
TEXT EDITOR field below in the page. Rename the label as you wish and then
press the ENTER key to store the new text on the corresponding field.
When all desired codes have been set to ON and the texts have been renamed
according to needs, press the OK key in the bottom page. If you further want to
save all data to a file press the STORE TO FILE button first and then set the
corresponding check box.
After starting the monitor you will see the following window, where all values
are updated continuously.
MAN IF50 I_E 1.0.odt 13 - Monitor function 72 / 80