LightWise ISG Allegro, Техническое руководство

Страница: 50 / 52

ISG Allegro LightWise USB 3.0 Technical Manual Version 1.3.1
50
Analog Control
Name Display Name Description Value
GainSelector Gain Selector Selects which Gain is
controlled by the various Gain
features
DigitalAll = 0x40
Gain Gain Controls the selected gain as
an absolute physical value.
This is an amplification factor
applied to the video signal
Min = 1.0
Max = 31.99
BlackLevelSelector Black Level Selector Selects which Black Level is
controlled by the various
Black Level features
0
BlackLevel Black Level Controls the selected black
level as an integer value. This
is an offset factor subtracted
from the video signal
Min = -512
Max = 512
BalanceRatioSelector Balance Ratio Selector Controls the mode for
automatic white balancing
between the color channels.
The white balancing ratios are
automatically adjusted
Red = 0
Green = 1
Blue = 1
BalanceRatio White Balance Ratio Controls ratio of the selected
color component to a
reference color component. It
is used for white balancing
Min = 0
BalanceWhiteAuto Auto White Balance Controls the mode for
automatic white balancing
between the color channels.
The white balancing ratios are
automatically adjusted.
Off = 0
Once = 1
Saturation Saturation Controls the Saturation
Control Coefficient
Min = 0.1
Max = 7.9
SaturationEnable Saturation Enable Enables the Saturation Off = 0
On = 1
Gamma Gamma Controls the gamma
correction of pixel intensity
Min = .2
Max = 1.0
GammaEnable Gamma Enable Enables the gamma correction
of pixel intensity
Off = 0
On = 1
Transport Layer Control
Name Display Name Description Value
PayLoadSize Pay Load Size Provides the number of bytes transferred for each
image or chunk on the stream channel. This includes
any end-of-line, end-of-frame statistics or other stamp
data. This is the total size of data payload for a data
block
CurrentSpeed Current Speed Current speed of USB bus Low Speed = 0
Full Speed = 1
High Speed = 2
Super Speed = 3