Safety precautions
• Prior to installing the Electric Switch, read through the wiring instructions
provided thoroughly.
• Before proceeding with the installation, check and ensure that no mains
power is being received.
If a separate wiring centre needs to be accessed,
make sure that no power is being received. If in doubt always consult a
qualified electrician.
• Never take unnecessary risks if unsure, as damage can be caused by an
incorrect installation.
• Do not strip the outer sheathing of flexible cables more than necessary to
prevent short circuits.
• Ensure that all cords pass through the cable clamps in the rear of the
control box and are securely fixed. Ensure that the power supply is connect-
ed such that the current carrying conductors become taut before the earth
conductor should the supply cord slip from the cable clamp.
• Only use indoors
• Not to be used as a fused spur
Installation
