LightwaveRF Connect JSJS LW550, Руководство по эксплуатации

Страница: 4 / 7

OPERATION:
Power O ff (Standby)
The LED unit can be powered o ff to save battery life
without removing the batteries. This can be useful if it
will not be used for an extended period of time.
1. Hold down the manual button; the LEDs will start to
dim. When they turn o ff completely
‘POWER OFF’
status is active.
If the LED is
‘OFF’
, hold down the manual button; LEDs
will illuminate and then turn o ff . The
‘POWER OFF’
status is now active.
While
POWER OFF
is active, any RF signal or press of
the manual button will not activate the LED.
2. To deactivate
‘POWER OFF’,
hold down manual
button; the LEDs will become brighter until they reach
maximum brightness con fi rming that
‘POWER OFF’
is
deactivated.
NOTE: POWER OFF
will also be deactivated when the
batteries are removed.
BATTERY REPLACEMENT (LED):
1. Slide down back cover.
2. Remove all 3 existing batteries and replace with
new ones.
3. Slide up back cover until a click is heard.