LightwaveRF Connect JSJS LW550, Руководство по эксплуатации

Страница: 2 / 7

The portable LightwaveRF Connect LEDs can be
turned ON and OFF manually or by using the
accompanying remote control.
SETUP:
Before operation, ensure that the plastic fi lm
isolating the battery in the remote handset is fi rst
removed.
NOTE:
If attached to a wall or ceiling, care must be
taken to ensure that the portable LED unit is
properly secured.
Pairing the device with the remote control
1. Enter LEARNING MODE by temporarily removing
one of the batteries and then replacing it; the LEDs
will fl ash to indicate that learning mode has been
activated.
2. On the remote handset press ‘ON’; the LEDs on
the receiving unit will fl ash rapidly to con fi rm that
it is now paired with the transmitting remote.