Screws
Mounting
hole
Hook
Install the cable clamp
Mounting the Boiler Switch
You can now close the boiler casing by
following the relevant instructions from
your manual. It is recommended to mount
the Boiler Switch to the wall next to the
boiler in a suitable place. The backplate
includes two screw holes which allow the
plate to be mounted to a wall using
suitable screws. Once mounted, the main
unit can be slotted back into place and
the screws tightened.
Once the cable(s) have been connected,
the cable clamp needs to be reattached in
order to secure them and to ensure that
they cannot become dislodged from the
terminal connections. The cable(s) should
run through holes situated at the base of
the unit.
Holes
Clamp
Completing the Install
Installation
