How does it work?
How do I get started?
Refer to the setup guide on the following pages
to get going. No specialist knowledge or tools
are required as these sockets are ‘plug and play’;
however, always remember to take care when
dealing with mains electricity.
The Plug-in Dimmer is designed to plug into any
standard 13A socket. It allows any connected
lamp (up to 300W) to be turned on and off and
dimmed using the remote control included in this
pack, or by using a smartphone / tablet
(requires the Lightwave Link).
Help video & further guidance
For additional guidance, and to watch a video
that will help guide you through the installation
process, please visit the support section on
www.lightwaverf.com
Get Started
