Lightwave Communications SCS1620, Руководство по эксплуатации продукта, Страница: 73 / 98

A Lantronix Company SCS1620 Product Manual
15.00.032 Rev. B Page 73
7.0 Modem Setup
If your SCS1620 system was shipped with a modem installed, it is not necessary
to perform the Modem Setup and you can skip this chapter. This may only be
required if the modem module is installed in the field.
7.1 Installing a Modem Card
The modem card is hot-swappable, so it is not necessary to power down the unit
before installing the modem card.
1.
Remove the blank metal plate covering the modem slot on the SCS1620.
Insert the modem card
2. Insert the modem card into the open slot in the rear of the Console Server.
3. Tighten the screws on the modem card by hand.
Tighten the screws on modem card
4.
Refer to Section 7.2 for Modem Initialization (
install_modem
install_modem install_modem
install_modem
).
Connect the modem to your telephone line using the RJ11 telephone cord.