Lightwave Communications SCS1620, Руководство по эксплуатации продукта, Страница: 65 / 98

A Lantronix Company SCS1620 Product Manual
15.00.032 Rev. B Page 65
6.3 Device Commands
Device port parameters must be defined by the administrator using the
devices devices devices devices
or
editdev editdev editdev editdev
commands.
sysadmin>devices 1
Enter accepts present value
D1: Enter device name | NAME: DEVICE_01>
D1: 0=2400 1=4800, 2=9600, 3=19200,
4=38400, 5=57600, 6=115200 | BAUD RATE: 9600>
D1: 1=1, 2=2 | STOP BITS: 1>
D1: 0=None, 1=Odd, 2=Even, 3=Mark, 4=Space | PARITY: NONE>
D1: 6=6, 7=7, 8=8 | DATA BITS: 8>
D1: 0=OFF, 1=DCE, 2=DTE | EQUIP PORT TYPE: DCE>
D1: 0=XON/OFF, 1=RTS/CTS | FLOW CONTROL: XON/XOFF>
D1: 0=No, 1=Yes | INHIBIT BUFFERING IN DIRECT: No>
devices
Use
devices devices devices devices
to obtain a list of all options for all device ports.
editdev
Use
editdev editdev editdev editdev - - - -u <device number or name> u <device number or name> u <device number or name> u <device number or name>
to edit and update the
parameter settings of a device. Step through each device option; when done, the
system prompts 'Are you sure?' before accepting the changes.
dtedce
Use
dtedce dtedce dtedce dtedce
to configure the device ports as DTE or DCE, or to disable a device
port. Use
dtedce
dtedce dtedce
dtedce -
- -
-l
l l
l
to list the port settings for all ports.
listdev
A list of device port names and their corresponding port number may be
displayed by using the
listdev
command.
Programmable elements include: device name, baud rate, stop bits, parity, data
bits, DCE/DTE, flow control and inhibit buffering in direct mode. Pressing
<ENTER>
accepts the parameter as is. If changes need to be made, each
parameter may be edited as it comes up after each
>
prompt.
The device name cannot contain a space.
Seven (7) device baud rates are offered: 2400, 4800, 9600, 19200, 38400, 57600
and 115,200. Most devices use 9600 as the Console / Administration port's baud
rate, so the device port defaults to this value. Check the equipment settings and
documentation for the proper baud rate.