Lightware UCX Series, Руководство пользователя

Страница: 42 / 109

6. Software Control - Lightware Device Controller UCX series – User's Manual 42
Applied firmware package: v1.1.0b7 | LDC software: v2.5.4b3
6.6.2. USB-C Inputs
Clicking on the USB-C video input port icon results opening the Port properties window. The most important
information and settings are available from the panel.
USB-C input port properties window
General
Port name
The name of a port can be changed by typing the new name and clicking on the
Set
button. The following
characters are allowed when naming: Letters (A-Z) and (a-z), hyphen (-), underscore (_), numbers (0-9), and
dot (.). Max length: 63 characters.
Lock #lock #unlock
The port can be locked to the currently connected output ports by putting the tick. If the port is locked, the
crosspoint state of this port cannot be changed.
Mute #mute #unmute
The incoming signal can be muted/unmuted by putting a tick. If the port is muted, no signal is transmitted
from the input port.
Status information
Connected / Signal Presence / Resolution
Allowed HDCP Version #hdcp
ATTENTION! HDCP 2.2 signal handing is limited up to two input ports at the same time.
▪
Off:
The connected source will detect that the switcher is not HDCP-compliant and turn off
authentication if the content allows it.
▪
HDCP 1.4:
The connected source will detect that the switcher is compliant with HDCP 1.4 but not compliant
with HDCP 2.2.
▪
HDCP 2.2:
The connected source will detect that the switcher is compliant with HDCP 2.2.
Video Status
This section gives a feedback about the current video stream:
USB-C input port properties window
Frame detector
For more details see Frame Detector section.
   