Lightware LW3, Руководство по установке

Страница: 7 / 9

Page 7/9 Section 7. Content of the Backup File
7.
Content of the Backup File
The backup file contains numerous settings and parameters saved from the device. When the file
is uploaded to a device, the following will be overwritten:
MMX6x2-HT200 series matrix
Local serial port
RS-232 mode, Control protocol, Baud rate, Data bits, Stop bits, Parity
Port name and CI* port number
Ethernet settings
Enable/Disable on Local, Link and TPS lines
HDMI input port
Audio mode, HDCP setting, Port name
Analog audio input port
Volume, Balance, Gain, Port name
TPS input port
Port names, TPS mode, PoE (enabled / disabled), Ethernet (Enable / Disable)
Audio mode (Embedded / AUX1-4), HDCP setting
RS-232 mode, Control protocol, Baud rate, Data bits, Stop bits, Parity, CI port number
IR input port status (enable / disable), code length and repetition code
IR input port – Command injection mode (On / Off) and CI port number
IR output status (enable / disable), IR output modulation (enable / disable)
IR output port – Command injection mode (On / Off) and CI port number
HDMI output port
Power +5V mode, Audio mode, HDCP mode, HDMI mode, Port name
Test pattern mode, clock source and type
Analog audio output port
Volume, Balance, Gain, Mute setting, Port name
TPS output port
Port names, TPS mode, PoE (enabled / disabled), Ethernet (Enable / Disable)
Test pattern mode, clock source and type
HDCP mode, HDMI mode, Power +5V mode
RS-232 mode, Control protocol, Baud rate, Data bits, Stop bits, Parity, CI port number
IR input port status (enable / disable), code length and repetition code
IR input port – Command injection mode (On / Off) and CI port number
IR output status (enable / disable), IR output modulation (enable / disable)
IR output port – Command injection mode (On / Off) and CI port number
Network settings
DHCP status (enable / disable)
LW2, LW3 and HTTP port numbers
Static IP address, Network mask, Gateway address
Further settings
Emulated EDID list, User EDID data (U1-U12)
Event manager: All Events’ settings (1-100)
All Presets’ settings (1-6)
* CI: Command Injection