FAQ
“I don’t see any images in my image library.”
Please make sure your images height is exactly
80 pixels and that the folder name use only standard alphanumeric characters, no special characters
or diacritics.
“The software crashes at start or doesn’t display images properly.”
You are probably using an old
computer or operating system. Please make sure that your PC is quite new and that you are running
Windows 7 or Windows 8 operating system.
“A strange popup shows every time I connect Visual
Poi.”
This is nothing unusual or something to worry
about. It is a false message triggered by Windows.
Taking photos & videos of Visual Poi
Taking photos
Taking beautiful photos like the ones you see on our webpage is actually not very difficult, once you
have the right equipment and know what to do!
First you need to get a DSLR camera and a solid tripod. The type of camera is not so important, the
only requirement for it is to have full manual mode (“M” mode).
Set your camera on the tripod, set it to “M” mode and for starters dial the following settings:
•
ISO 100-200
•
Aperture F/6.3
•
Shutter speed 1/4 sec
Instruct your performer to spin 3-beat weave (or any other trick) and start taking photos. If the photo
is too dark or bright, change the aperture. If the Visual Poi trails are too “long” or “short”, change the
shutter speed to your liking.
Taking videos
Taking beautiful videos of your VisualPois can be a little tricky, because almost all cameras default to
wrong default video settings. But it’s not hard to get it right!
First, you need to get a camcorder or camera with
full manual settings
when shooting video. Any
intermediate or professional camera should have these settings. You must be able to individually set
these parameters on your camera:
•
frame rate (fps)
•
shutter speed
•
aperture (or iris)
•
ISO (or gain)
Содержание FT chip
Страница 1: ...Visual Poi V4 User manual V2 1...