Lightstar KDX-300, Инструкция по эксплуатации

Страница: 16 / 28

Page.15
5.3 Setting mode
In order to set and check the KDX-3 Series’s operating condition, hold the third key(●) for 2 seconds and switch to
setting mode. In settings mode, use the ◀, ▶ keys to check information and press the ●key to set and complete.
You can easily check your current location using page number.
① Using ● key, setting to be ready.
② Using ▲,▼ key, choose connection method.
③ Using ● key, setting value to be saved.
※ Setting range : 3P3, 3P4 ※ Default value : 3P4
① In setting mode, move to PT voltage setting page.
② Using ● key, setting to be ready.
Example) In case 3300/110V PT applied, primary
value can be 3300V/3.300kV/3.30kV
③ Using ▲,▼ key, choose the decimal point.
Or using ◀,▶ key, move to the digit to be changed
Chosen digit can be changed by using ▲,▼ key.
④ Using ● key, setting value to be saved.
PT Primary voltage setting
PAGE.2
PAGE.1
PAGE.3
PAGE.4
PAGE.5
1st
2nd
Connection Method setting
※ Setting range : [5 - 6000] ※ Default value : [5]
① In setting mode, move to CT current setting page.
② Using ● key, setting to be ready.
③ Using ▲,▼ key, choose CT current value.
④ Using ● key, setting value to be saved.
CT Ratio setting
Example) Set 100 for CT 100/5
※ Address setting range : [0 - 255]
※ Default value : Address(255), Speed(9600)
※ Communication speed : [9600,14400,19600]
① In setting mode, move to communication setting page.
② Using ● key, setting to be ready.
③ Using ▲,▼ key, choose setting value, and save with ● key.
Communication setting
※ Setting range : YES, NO ※ Default value : NO
① In setting mode, move to max value reset page.
② Using ● key, setting to be ready.
③ Using ▲,▼ key, choose ‘YES’ or ‘NO’.
④ Pushing ● key, after choose ‘YES’ , Max A,V,W value to be reset
and move to first page.
Reset - V, A, W Max value
Chapter_5. Mode description