Lightstar KDX-300, Инструкция по эксплуатации

Страница: 12 / 28

5.2 Display mode
Display power metering values and status
Page.11
Chapter_5. Mode description
Phase Voltage and Frequency
Line to line Voltage and Frequency
Values referring CT ratio
100% in graph if secondary current is 5A
※ CT ratio can be adjust in setting mode
※ Decimal point and unit can be varied by PT ratio
(Refer to decimal point/ unit table)
Phase current and circular graph
※ Lead : lag :
Phase power factor and average power factor
※Decimal point and unit can be varied by CT/PT ratio
Phase active power and total active power
PAGE.2
PAGE.3
PAGE.1
PAGE.4
PAGE.5
Values referring PT ratio
* PT ratio can be adjusted in setting mode.
* Decimal point and unit can be varied by PT ratio.
(Refer to decimal point/ unit table)
Values referring PT ratio
※ PT ratio can be adjusted in setting mode.
※ Decimal point and unit can be varied by PT ratio.
(Refer to decimal point/ unit table)