Lightspeed Zulu 3, Руководство пользователя

Страница: 14 / 24

Using Devices Enabled by Bluetooth Technology
12
Connecting to Mobile Devices for the First Time
The Bluetooth interface allows cell phone and stereo
music streaming capability (A2DP). Before using a
mobile phone for the first time with Zulu 3, it must
be “paired” or electronically connected via Bluetooth
wireless technology.
To pair a mobile phone or device with Zulu 3:
1. Turn on the headset and verify the GREEN LED is
flashing. Make sure the Bluetooth mode is turned
OFF.
BLUE or RED
flashes from the Bluetooth
LED should not be present (see “Bluetooth
Mode—ON and OFF”, page 13).
2.
Press and hold
the Zulu 3 Bluetooth button for
about five to ten seconds or until the Bluetooth
LED
continually flashes RED and BLUE . This
indicates the Zulu 3 pairing mode setting and
lasts about two minutes. If this step takes longer
and the Bluetooth LED is no longer alternating
RED and BLUE, start over from step one.
3. With Zulu 3 in pairing mode, follow the menu
prompts on your Bluetooth wireless technology
enabled device directing it to look for other
Bluetooth wireless technology enabled devices.
4. Select Lightspeed-V### (numbers may vary) on your
mobile device from the list of found devices.
5. If asked to enter a password or PIN, enter 0000.
Your mobile device should now be paired and ready
for continued use with Zulu 3.
When you turn on Bluetooth mode again, it will
connect to the most recently paired device. Most
mobile devices connect to Zulu 3 automatically. If