ComPriority™
ComPriority is turned on or off by the bottom-most
controller button. With ComPriority on and when
radio communications are detected, the volume
of auxiliary devices will be significantly reduced. To
enable ComPriority, turn on the feature, plug into your
intercom and talk into the headset microphone while
playing music over a wired device. If enabled, your
auxiliary music volume will decrease when you start
to talk. During cell phone calls, the other party will be
muted, so disable ComPriority before making calls.
Mic Gain Adjustment
You can think of microphone gain as a volume
control for your microphone, helping balance loud
and soft voices in a multi-headset environment. To
access the gain adjustment dial, remove the foam
Using Your Zulu 3 Headset
9
windscreen on your microphone and then remove
the small cap next to the Lightspeed logo. Turn the
dial clockwise to increase gain and counterclockwise
to decrease gain. Move the dial in small increments
(think one-hour increments on a clock face) and test it
in your aircraft. Replace the cap and foam windscreen
when you are satisfied with the adjustment.
Wired Auxiliary Devices
Zulu 3’s wired auxiliary input allows you to connect
to cell phones and to most audio devices. To
connect a music player to Zulu 3’s auxiliary input
jack, use the cord provided. To adjust the volume on
a device connected to Zulu 3’s auxiliary input jack,
use the controls on the device itself.
Содержание Zulu 3
Страница 1: ...Zulu 3 User Guide...
Страница 5: ...Pre Flight Checklist Introduction 3 Zulu 3 User Guide...
