Lightspeed Delta Zulu, Руководство пользователя

Страница: 18 / 34

18
Bluetooth Features
Depending on the Bluetooth profile of the connected
device, you can use the Delta Zulu Bluetooth buttons
to perform several functions.
Some typical functions are:
• Press the Bluetooth button once for voice dialing
(if supported by your phone).
• Press the Bluetooth button once to answer a call.
• Press the Bluetooth button once to disconnect
from a call.
• Press and hold the Bluetooth button for two
seconds to redial the last number called.
• Use the Bluetooth volume buttons (+ and –
buttons) to adjust the volume. You may also
adjust the volume on your connected device.
Bluetooth Mode—ON and OFF
The Bluetooth feature automatically turns on when
you power on the headset. On the first power up
the headset will enter into pairing mode (as seen
by an alternating red & blue LED). The headset
will remain in pairing mode for approximately 1
minute to allow you time to open your settings on
your phone or tablet and pair to the headset. On
subsequent power ups, the headset will attempt
to reconnect to the device that it was last paired
to. If that device is not found, the headset will enter
pairing mode again for 1 minute. If at the end of 1
minute no device is paired, the Bluetooth function
turns off. To start the pairing process again, press the
Multi-function Button (MFB) 3 times to enter forced
pair mode.
Note: The Bluetooth feature must be turned on for
devices connected via Bluetooth to function correctly.
Bluetooth
®
Wireless Technology