11
SE
T-
U
P &
OP
ER
AT
ION
Connect Access Link to Amplifier
STANDARD UNBALANCED CONNECTION
1. Plug one end of the included 3.5mm cable into the AUDIO OUTPUT connection on
Access Link.
2. Plug the other end into a microphone or audio input connection on an amplifier.
NOTE:
depending on the type of input jack on the amplifier, an adapter or other
audio cable with matching plug may be required (not included).
3. Set the MIC/LINE level switch in the appropriate position. Generally LINE level is
used unless the amplifier input is specifically marked as a “Microphone Input.”
BALANCED CONNECTION FOR LONGER CABLE RUNS
In the event Access Link must be located more than 12 feet away from the amplifier,
it is recommended to use the balanced audio output on Access Link. To ensure a fully
balanced connection, there must be a true balanced input on the amplifier and a
balanced audio cable must be used.
1. Connect the stripped wires into the marked openings on the Euroblock connector:
A. Insert the positive and negative signal wires to the marked terminals.
B. Insert the shield to the ground terminal.
2. Secure the inserted wires by tightening the retaining screws.
3. Connect the other end of the cabling to a balanced input on the existing amplifier.
+ –
Audio Inputs
Audio Outputs
USB
Unbalanced
Balanced
5VDC/0.2A
Mic/Line
-40dB / 0dB
Optical
3.5MM AUDIO CABLE
(Included)
AUDIO AMPLIFIER
INPUT CONNECTION
+ –
Audio Inputs
Audio Outputs
USB
Unbalanced
Balanced
5VDC/0.2A
Mic/Line
-40dB / 0dB
Optical
BALANCED AUDIO CABLE
(Not included)
AUDIO AMPLIFIER
BALANCED INPUT CONNECTION
