Lightspeed 955Access, Руководство пользователя

Страница: 14 / 40

14
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
4. Maintenance &
Tr
oubleshooting
5. W
arranty
, Safety
& Specifications
1. CHARGING THE FLEXMIKE
Before use, the Flexmike should be charged. It will take 8-9 hours for the
Flexmike to obtain a full charge. A fully charged Flexmike will last for up to 8
hours of use. If microphones are used daily, they should be charged each night.
When properly inserted into a cradle charger, the Mic 1 or Mic 2 light will glow
blue and the red light on the Flexmike power button indicates the battery pack
is charging. The power button light will glow green to indicate that charging is
complete and a full charge has been reached.
Replacement NiMH battery packs may only be purchased through Lightspeed
Technologies (part # NH2.4V). Do not attempt to charge with other battery packs.
They can overheat and expand creating a significant hazard and damaging the
microphone (this is not covered by warranty).
1. Plug power cord into the cradle
charger and then plug the AC
end into an electrical outlet.
2. Place the Flexmike into the
cradle. (Figure 1) The LED on
the Flexmike power button will
glow red indicating charging has
started. The Mic 1 or Mic 2 light
will glow blue. (Figure 2)
3. If Flexcat speaker pods were
purchased with your 955 Access
system, the Flexmike will be
charged in the Flexcat Charging
Station. Please see the FCP User
Manual for instruction.
4. Hang the Flexmike on the lanyard
opposite the magnetic clasp.
(Figure 1)
(Figure 2)