Lightspeed 5G-500G, Руководство пользователя

Страница: 7 / 65

USER Manual Page 7 of 65
2.3.1. WPS (Push button)Wi-Fi Protected Setup (WPS) is designed to make the process of
connecting to a secure wireless network from a computer or other device easier.
2.3.2. Reset (Push button)
It is software reset for5G gateway 500G.
2.3.3. WiFi ANT1, ANT2, ANT3 & ANT4
There are 4WiFi antennas with dual-bands 2.4GHz & 5GHz.
2.3.4. USB 3.0 Type A female connector for USB 3.0 device.
2.3.5. WAN
2.5Gbps WAN port for ADSL or other wide-band devices.
2.3.6. LAN 1,2,3,4.
User can connect 5G gateway 500G with Host PC, HUB, Router etc, via Giga LAN.
2.3.7. Console
This port is hidden inside of unit to see the diagnostic data via this console port.
Normally this port is for debugging. It is for manufacturer use only. The console port is
using special TTL interface cable with setting as 57600bps 8 data bitnone parity 1 stop
bit.
2.3.8. 4 fix WiFi 2.4G+5G antennas
These are for WiFi 802.11b/g/n/ac/ax 2.4GHz & 5GHz dual-bands antennas to do both
transmit & receive.
2.3.9. LED WiFi 2.4G 5G
LED State Description
Green
ON Indicates WiFi connected.
BLINK Indicates data are existed via WiFi
OFF Indicates WiFi disconnected.
2.3.10. LED LAN 1, 2, 3, 4 .The RJ-45 connector (LAN port) has 4 LEDs. Below the table shows
each status of LAN connection.
LED State Description
Green
ON Indicates LAN connected.
BLINK Indicates data are existed via LAN.
OFF Indicates LAN disconnected.
[Table 1: LED Description on LAN port]
2.2.12 LED WAN
LED State Description