Lightspeed 5G-500G, Руководство пользователя

Страница: 13 / 65

USER Manual Page 13 of 65
Checking device
5G gateway 500G is set by PPP (NAT Router) in the first time.
When you get this device in the first time, please check whether this device is correct
or not.
Please follow below steps to check this device seeing the 11-
Status LED’s operation.
2.6.2. Install 5G gateway 500Gas
following the “3.1 Installation.”
* Be sure the LAN cable must be connected between PC and 5G gateway 500G.
2.6.3. When you plug in power, the LED named
“PWR” is on.
2.6.4. The LED named
“CELL 5G” is on.
* You can see this LED on in 20 seconds. When this LED is not on, contact us or our office.
2.6.5. The LED named
“LAN” is on. If LAN 1 is inserted, then LAN No.1 LED will be on.