Lightsafe_EDL1PT_Instructions_Rev01
Technical Specification:
Voltage:
230v AC 50Hz
Lamp:
1.5W LED
Wattage:
1.5W
Colour Temp:
6500K
Lumen Output:
117lm
Class:
1
Battery:
3.6V 2Ah NiCad
Emergency Duration:
3 Hours
Recharge Time:
24 hours
Temp Range:
0
℃
- 40
℃
Dimensions:
PCB housing:φ31x230mm, Battery housing:φ31x149mm,
LED tray:φ45x33mm
Cut Out Diameter:
φ35mm
Weight:
342g
IP:
IP20
Warranty:
This product is covered by an extended warranty for 2 years from date of purchase.
Batteries are regarded as a consumable item, and as such, are not covered by the Extended Warranty
periods and are only covered by a 1 year warranty.
The extended warranty is available following installation in the UK or Ireland by a competent person in
accordance with the current building and IEE wiring regulations.
For full terms and conditions in regards to our extended warranty please refer to the website.
Due to our policy of continuous improvement we reserve the right to change specification without
prior notice.
Errors and omissions excepted. These instructions have been carefully checked prior to publication.
However, no responsibility can be accepted by Firesafe for any misinterpretation of these instructions.
LIGHTSAFE
Distributed by: FIRESAFE
10 Sandersons Way,
Blackpool, FY4 4NB
Email:
Web:
www.firesafe.co.uk
Part No:
Date:
Date:
Signed
Date
Signed
Date
Signed
Date
Signed
Date
1
Short
2
Short
3
Short
4
Short
5
Short
6
Short
7
Short
8
Short
9
Short
10
Short
11
Short
12
Full Duraiton
INSTALLATION / TEST
RECORDS
Location:
Installed By
Comissioned By:
FOURTH YEAR
MONTH
TEST
FIRST YEAR
SECOND YEAR
THIRD YEAR
