6
www.lights.de
LIGHTS 4 Europe GmbH & Co. KG ∙ Gaildorfer Str. 6 ∙ D-71522 Backnang
Tel. +49 7191 323020 ∙ Fax +49 7191 323029 ∙ [email protected]
IG_
L
u
c
id_
s
iriu
s
_
D
E
_
2
3
.0
6
.2
0
1
7
_V
3
.0
-
S
imi
lar
to
ill
u
s
tr
a
tion
s
, t
e
c
h
n
ic
a
l
d
a
ta
a
re
s
u
b
jec
t t
o
c
h
a
n
g
e
Preparation for
fitting
Note: Only install the light on a solid surface. The fitting bracket supplied is suitable for ceiling installation.
1. In the packaging the fitting bracket for the luminaire is at an angle. For installation the fitting bracket must
be set at right angles after unpacking.
2. Select a suitable or desired horizontal installation location with sufficient air circulation. The mounting
holes are 105 mm, for the mounting of the fitting bracket use two stainless steel screws with a diameter
of at least 6 mm. Using any other screw material can result in contact corrosion on the fitting bracket.
The distance from the centre to the inner holes is 68 mm and to the outer holes 108 mm. When drilling in
walls or ceilings, please be aware there may be cables of pipework there, which you might hit with the
drill.
3. Then connect the existing, flexible connection cable for mains
supply on the product to the existing power supply on site, pro-
tected in an external power distribution box (not included in the
scope of delivery), with at least the same protection type as
the product, in accordance with the following illustration. For
the connection terminal, we recommend using a 3 pole, insu-
lated connector from the WAGO 294 series for a nominal
cross section of 2.5 mm² and a nominal voltage of at least 500
V, meeting the VDE directives 0700 (EN 60 335-1),VDE 0613
(EN 60 998) and VDE 0711 (EN 60 598-1) for use in devices
and luminaires up to 24 A.
2160 mm
136 mm
68 mm
108 mm
Fitting bracket
