MAXIMUM DIMMER LEVEL
This adjustment allows you set the maximum brightness of the lights connected to
the dimmer channel. You can now reduce the maximum intensity of the lights
connected to the dimmer channel, while still having the FF-151 flicker and dim them
more during a “lightning strike”. This adjustment is purely a matter of preference.
SPECIFICATIONS AND FEATURES
MAXIMUM POWER HANDLING
-
Lightning – Up to 2,000 watts
Dimming – Up to 1,000 watts
ELECTRICAL ISOLATION
– Low voltage is provided by an isolated switch mode
power supply. Solid-state optical isolation is also utilized to separate low voltage
and audio circuits from AC power circuits.
SAFETY FEATURES
– A user accessible master fuse (25 amp) is located on the back
panel. Individual channels are internally fused. Internal surge suppression is also
provided.
LIGHTS SUPPORTED
– Lights Alive ProLight-200 LED, ProLight-400 (preferred),
incandescent, halogen, plus many dimmable LEDs and some dimmable compact
fluorescent bulbs.
THRESHOLD
– This feature extends the life, improves response time and increases
sensitivity of incandescent and halogen bulbs. It also improves apparent sensitivity
of LED fixtures.
FACTORY DEFAULT
– When in doubt, start over. The factory default option allows
you to quickly return to known working values and be back in operation within
seconds.
CONTROL METHOD
– Digitally generated phase cut dimming. The amplitude
(volume) of the thunder determines the intensity of the light.
ELECTRICAL REQUIREMENT
– 120 volts, 60 Hz, up to 20 amps (depending on
lights connected).
PREFERRED ENVIRONMENT
– 0ºF to 100ºF, 10-90% (non condensing) relative
humidity.
